Jiabaida (JBD) Smart BMS 20S 72V 100A Li-ion Battery Protection Module with Bluetooth Dongle BMS

$104.50

JBD SMART Li-ion 20S 72V 100A  Common port Bluetooth Battery protection Module (default toLi-ion cells) WITH 21 wire sense cable with connector, Thermostat and bluetooth dongle

4 in stock

Description

Jiabaida (JBD) Smart BMS 20S 72V 100A Li-ion Battery Protection Module.

JBDBT 20S LI-ION 100A

Introduction about this JBD BMS:

This bms is especially for 20S Bluetooth or smart fixed configurations only. Basically it can also be used for any other lithium technologies even if  LiFePo4, Lithium Ion, LiPo and Lithium Metal by changing internal parameters after connecting to Bluetooth App or computer. Most important that  it is strictly for 20S battery packs only. As a result, that they cannot be used for any other battery pack Configurations.

In the same way all Parameters can be changed Via Bluetooth App or UART USB Connection with PC Monitoring Program .Default setting inside BMS are for lithium-ion batteries.

Over charge and over discharge protection: 

The Lithium-ion battery pack will stop charge after the cell voltage reaches 4.25V and stop discharge when its voltage reaches 3V.

Temperature Protection:

  • In high temperatures the bms ranges from 70℃ discharging battery protection.
  • Meanwhile in low temperatures the bms ranges up to -20℃ battery protection.
Alarm for danger:
          When Factors Like Temperature or Voltage or Current Cause Damage to the Battery then there will be Alarm Display on Bluetooth Smart BMS APP.
Applications:
          Solar and RV, Electric bikes and Skateboard including camping boats and Power tools, Lawn moving and household energy storage systems etc.

What you will get:

  •  JBD 20S Smart Li-ion 100A rated voltage with 72V BMS
  • Balanced wire sense cable (21 Wire sense cable with connector)
  •  Bluetooth dongle
  • Thermostat
  • Instruction Manual
Conclusion:
  • Please use Xiao Xing App for Bluetooth Applications .The link is available in bms batteries website software downloads dropdown box
  • This BMS is also used for all kinds of lithium-ion cells including 18650 ,21700,32650 prismatic cells.
DESCRIPTION SPECIFICATION
BATTERY TYPE    Li-ion cells(default)  LiFePo4 cells(if preferred)
Recharging current 100A
Discharging current 100A
Peak current 300A for 5 Sec
Charger voltage (CC-CV)    S*4.2V S*3.6V
  Charge Voltage    S*4.25V   S*3.75V
Over-charge protection voltage      4.250V    3.650V
Over-charge protection delay time 1000mS
Over-charge protection recovery voltage     4.180V     3.450V
  Over-discharge protection voltage     2.800V     2.500V
  Balance release voltage      4.18V      3.5V
  Over-discharge protection delay time 100mS
Over-discharge protection recovery voltage     2.900V     3.000V
Over-discharge protection recovery condition Disconnect load or Charging activation
  Discharge overcurrent  protection current value 360A
   Discharge overcurrent  protection delay 1000mS
Discharge overcurrent protection recovery condition Disconnect load or Charging activation
    Short circuit protection delay time 200uS
       Short circuit protection recovery Disconnect load
           Balanced turn-on voltage      4.190V       3.450V
           Balanced current 60mA
       Temperature protection value 75 ͦ c
  Temperature protection release value 53 ͦ c
       Discharge loop internal resistance 20mΩ
             Self-consuming in operating mode 20uA
      Working humidity in normal operating range -20 – 70 ℃
    Storage temperature when Humidity<90%, No condensation -40 – 85 ℃
                                                SIZE 5.6*4.9*0.8In
                                            WEIGHT 15 Ounce
                      JBD Wiring Diagram JBD Wiring Diagram
                          JBD User manual JBD User Manual

https://srikobatteries.com/product/jiabaida-jbd-smart-bms-20s-72v-100a-li-ion-battery-protection-module-with-bluetooth-dongle-bms/

Additional information

Weight 18 oz
Dimensions 10 × 7 × 3 in