DALY BMS 4S 12V Lithium ion 30A Common Port Battery protection module.

$14.85

DALY Li-ion 4S 12V 30A Common Port Battery protection Module (NOT FOR LIFEPO4 Cells) WITH 5 wire sense cable with connector

1 in stock

Description

DALY BMS 4S 12V 30A Lithium ion with Balance leads.

DALY 4S Li-ion 30A

Introduction about this BMS: 

This is a 4S fixed configuration basically it cannot be used for any other battery pack configurations. Because it is only a Lithium ion battery management system only. As a result that they cannot be used for LiFePo4 and Li-Metal or LTO batteries. It is strictly for Li-Ion battery packs only.

Over charge and over discharge protection:

The Li-ion battery pack will stop charge after the cell voltage reaches 4.25V and stop discharge when its voltage reaches 3V.

Temperature Protection:

In high temperatures the bms ranges from 70℃ discharging battery protection.

Meanwhile in low temperatures the bms ranges up to -20℃ battery protection.

Short circuit protection:

When there is a defect or damage to the circuit at same time the bms will shut down the whole Battery.

Certifications Approved:

ISO/ FCC/ RoHS/ PSE and CE APPROVED

Applications:

Solar and RV, Electric bikes and Skateboard including camping boats and Power tools, Lawn moving and household energy storage systems etc.

What you will get:

  • 4S Li-ion 30A rated voltage with 12V BMS
  • Balanced wire sense cable (5 Wire sense cable with connector)
  • Instruction Manual

Conclusion:

Most important that it is only a waterproof bms available in lithium industry.

This BMS is also for all kinds of lithium-ion cells including 18650 ,21700,36500 cylindrical cells and prismatic cells.

DESCRIPTION SPECIFICATION
BATTERY TYPE Li-Ion
Continue discharge current 30A
Peak current 90A±15A
main circuit inner resistance ≤ 20mΩ
Charge Voltage S*4.25V
Charge Current 15A
Over charge detect  voltage 4.25 ± 0.05V
Over charge protection delay       1 Sec
over charge release voltage 4.15 ± 0.05V
Balance detect voltage 4.18V
Balance release voltage 4.18V
Balance current 30± 5mA
Over discharge detect voltage 2.7 ± 0.1V
Over discharge detect delay 1 Sec
Over discharge release voltage 3.0 ± 1.0V
Over current detect delay 1 mS
Over current detect voltage OFF LOAD
Short circuit protection condition Short circuit external load
Short circuit detect delay 250µS
Short circuit protection  relay condition Off load
Temp protection Charge  <-5  ͦ or >50  ͦ

discharge < 70  ͦ

working current 100µA
Sleeping current (when in discharge) 20µA
 Working temp range -20   ̴ 70 ͦc
Sleeping temp range  -40   ̴ 80 ͦc
Weight 5.5 ounces
Size 2.5*3.1*0.6 inches
Wiring Diagram Daly wiring diagram

Example for Daly BMS Wiring Diagram:

https://dalybms.com/16s-bms-wiring-tutorial/

 

 

https://srikobatteries.com/product/daly-bms-4s-12v-lithium-ion-30a-common-port-battery-protection-module/

Additional information

Weight 8.5 oz
Dimensions 10 × 7 × 2 in