DALY BMS 16S 48V LiFePo4 250A Common Port Battery protection module

$130.58

DALY BMS LiFePO4 16S  48V 250A common port battery protection module(not for li-ion/NMC cells) WITH 17 wire sense cable with connector

1 in stock

Description

DALY BMS 16S 48V 250A LiFePo4 with Balance leads.

DALY 16S LFP 250A

Introduction about this BMS: 

This is a 16S fixed configuration basically it cannot be used for any other battery pack configurations. Because it is only a lithium iron phosphate battery management system only. As a result that they cannot be used for Li-Ion, Li-Metal or LTO batteries.It is strictly for LiFePo4 battery packs only.

Over charge and over discharge protection:

The LiFePo4 battery pack will stop charge after the single cell voltage reaches 3.7V and stop discharge when its voltage reaches 2.5V.

Temperature Protection:

In high temperatures the bms ranges from 70℃ discharging battery protection.

Meanwhile in low temperatures the bms ranges up to -20℃ battery protection.

Short circuit protection:

When there is a defect or damage to the circuit at same time the bms will shut down the whole Battery.

Certifications Approved:

ISO/ FCC/ RoHS/ PSE and CE APPROVED

Applications:

Solar and RV, Electric bikes and Skateboard including camping boats and Power tools, Lawn moving and household energy storage systems etc.

What you will get:

  • 16S LiFePo4 250A rated voltage with 48V BMS
  • Balanced wire sense cable (17 Wire sense cable with connector)
  • Instruction Manual

Conclusion:

Most important that it is only a waterproof bms available in lithium industry.

This BMS is also for all kinds of lithium-ion cells including 18650 ,21700,36500 cylindrical cells and prismatic cells.

DESCRIPTION SPECIFICATION
BATTERY TYPE LiFePo4
Continue discharge current 250A
Peak current 750±125A
main circuit inner resistance ≤ 20mΩ
Charge Voltage S*3.75V
Charge Current 125A
Over charge detect  voltage 3.75 ± 0.05V
Over charge protection delay       1S
over charge release voltage 3.65 ± 0.05V
Balance detect voltage 3.5 V
Balance release voltage 3.5 V
Balance current 30 ± 5 mA
Over discharge detect voltage 2.7 ± 0.1 V
Over discharge detect delay 1S
Over discharge release voltage 2.7 ± 0.1 V
Over current detect delay 1mS
Over current detect voltage Off load
Short circuit protection condition Short circuit external load
Short circuit detect delay 250µS
Short circuit protection  relay condition Off load
Temp protection Charge  <-5  ͦ C or >50  ͦ C

discharge < 70  ͦ C

working current 100µA
Sleeping current (when in discharge) 20µA
 Working temp range -20   ̴ 70 ͦc
Sleeping temp range  -40   ̴ 80 ͦc
Weight 3 Pounds
Size 9*6*1.2 inches
Wiring Diagram Daly wiring diagram

Standard & Smart 16S BMS wiring tutorial:

https://dalybms.com/16s-bms-wiring-tutorial/

 

https://srikobatteries.com/product/daly-bms-16s-48v-lifepo4-250a-common-port-battery-protection-module/

Additional information

Weight 51 oz
Dimensions 20 × 7 × 3 in

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
R
Rik
Satisfied

Good to work with. Great customer support